BMW 318is clutch upgrade for client from Blacktown

A returning customer brought in his modified 1997 BMW 318is to have a new clutch fitted.

The car has had a supercharger fitted and other modifications and the standard clutch did not cope well with the extra power and had worn out.

The customer was looking for an inexpensive replacement clutch that could handle the extra power.

We ended up fitting the flywheel and clutch from the six cylinder version of the same BMW 3 series coupe. The 6 cylinder parts are a similar weight but the clutch friction surface is significantly larger. Most importantly, these parts bolt in without any modifications.

Like with any clutch replacement, we also checked and changed other components such as the rear oil seal and spigot bearings, and lubricated all of the moving parts.

The customer reports that the car is driving as new and he can now use the extra power without the clutch slipping any more.

If you need any service or repairs to your BMW I welcome your enquiry.

Commodore VT belt tensioner replacement for client from Seven Hills

Brian from Seven Hills brought in his Holden Commodore VT for repair, as the serpentine belt had broken due to a bad belt tensioner, and the car was hard to start.

This is a common failure item on the Ecotec V6 engine and can cause the belt to skip out of position and wear on other components like the water pump.

I replaced the belt tensioner and found several causes for the hard starting problem including the air filter and clogged throttle body and idle control valve.

I service all makes and models at my workshop in Girraween, Western Sydney. Please contact me if you need help with your car.

Commodore VT V6 Belt Tensioner

BMW 318is exhaust repair for client from Seven Hills

Joanne is a returning customer and brought in her BMW 318is (E36) for repair as it was making an unusual noise.

The exhaust manifold had cracked which is a common problem with the BMW M44 engine.

I was able to quickly and inexpensively fix the car for Joanne, using a good second hand part.

The car is back to normal now and Jo is very happy having it nice and quiet again.

I specialise in European cars including BMW. Contact me if you need someone who knows BMW’s well to look after your car.

BMW 318is exhaust manifold